mpadapa
03-18 09:58 AM
http://immigrationvoice.org/forum/showpost.php?p=231163&postcount=914
Thank you everyone for sending letters. We are now in Phase 2 of the campaign.
State chapter leaders have been informed of the update. Please get in touch with your state chapter groups for more regular updates on the Admin Fixes campaign. More updates will be given by the chapter leaders as we make progress in the Admin fixes campaign.
If you do not have a state chapter, please join a state chapter near your state.
Thank you everyone for sending letters. We are now in Phase 2 of the campaign.
State chapter leaders have been informed of the update. Please get in touch with your state chapter groups for more regular updates on the Admin Fixes campaign. More updates will be given by the chapter leaders as we make progress in the Admin fixes campaign.
If you do not have a state chapter, please join a state chapter near your state.
wallpaper Location: Java Hut (797 west
dan19
04-13 11:11 AM
USCIS didnt announce that..Any links to the announcement?
No visa bulletins till October2007
Thats what USCIS announced 2 weeks back
So stay cool:)
No visa bulletins till October2007
Thats what USCIS announced 2 weeks back
So stay cool:)
munnu77
02-21 04:55 PM
why r we wasting time in such a useless topic...
those who really want to help IV financillay and r backing off frm just some false rumours...
Go to the post Office and send a money order...so tht u dont have to worry abt anything...anyway..its a matter of time u will know all theses rumours were false...
We might succeed in ending GC retrogression...but i am sure some desi minds will retrogress for the next 100 years...
those who really want to help IV financillay and r backing off frm just some false rumours...
Go to the post Office and send a money order...so tht u dont have to worry abt anything...anyway..its a matter of time u will know all theses rumours were false...
We might succeed in ending GC retrogression...but i am sure some desi minds will retrogress for the next 100 years...
2011 Laurel of the Java Hut (makes
rb_248
12-13 03:21 PM
Hi,
I have got a job offer & this employer has few pre-approved labors which he offered me if I join him.
I am on H1B visa since 3.5+ years & I am looking for the company to get my GC as soon as possible. I have BS + 10 years of IT experience in India/ USA/ UK, as Software Engineer/ Solution Architect / Project Lead/ Project Manager / Sr. PM etc.
I want to know :
1. Is it possible to use this pre-approved labor for me... if I have all matching skills & experiences to show in my resume (experiences/skills gained before that approval date of that labor)...? This approved labor shows the name of their previous consultant.
2. Is it necessary to file the labor substitution by the employer...if I want to use that approved labor...?
3. Is it possible for this employer to directly file my I-140 against this approved labor...?
4. What are the info/proofs to verify that this employer is really filling my I-140 against this labor... ? (This employer has their attorney & I could not have better communication with their attorney)
5. This employer is a consulting company...(desi) & they asked me to sign a financial agreement to repay their expenses on labor substitution/I-140/I-485...if I will leave them early. ...Is it legal to ask for such kind of agreement...?
Please let me know as much as info/ guidance you can provide to me.
Great thanks in advance for all of your help.
-------------------------------------------
Congratulations on getting ahead. Make sure this is not a scam. Especially during such crisis times, we are very vulnerable.
Employer asking for financial agreement - hmmmmm...... After making sure this is not a scam, confirm again.
I have got a job offer & this employer has few pre-approved labors which he offered me if I join him.
I am on H1B visa since 3.5+ years & I am looking for the company to get my GC as soon as possible. I have BS + 10 years of IT experience in India/ USA/ UK, as Software Engineer/ Solution Architect / Project Lead/ Project Manager / Sr. PM etc.
I want to know :
1. Is it possible to use this pre-approved labor for me... if I have all matching skills & experiences to show in my resume (experiences/skills gained before that approval date of that labor)...? This approved labor shows the name of their previous consultant.
2. Is it necessary to file the labor substitution by the employer...if I want to use that approved labor...?
3. Is it possible for this employer to directly file my I-140 against this approved labor...?
4. What are the info/proofs to verify that this employer is really filling my I-140 against this labor... ? (This employer has their attorney & I could not have better communication with their attorney)
5. This employer is a consulting company...(desi) & they asked me to sign a financial agreement to repay their expenses on labor substitution/I-140/I-485...if I will leave them early. ...Is it legal to ask for such kind of agreement...?
Please let me know as much as info/ guidance you can provide to me.
Great thanks in advance for all of your help.
-------------------------------------------
Congratulations on getting ahead. Make sure this is not a scam. Especially during such crisis times, we are very vulnerable.
Employer asking for financial agreement - hmmmmm...... After making sure this is not a scam, confirm again.
more...
sathish_gopalan
02-14 11:28 AM
My wife is using EAD . I am still on H1 and have not started using EAD. Can I still switch to a new employer with a H1 transfer ?. Or since, she is in EAD, should I do an AC21 only with EAD ?. Thanks..
gc_kaavaali
12-08 01:46 PM
Hi,
IV is trying to achieve these things...but it cannot do until unless members contribute something...IV need contributions to invest in the omnibus bill Lobbying efforts.. for more details look at below thread...
http://immigrationvoice.org/forum/showthread.php?t=15905
Get one thing done is better than spreading limited resources on multiple topics. To increase immigration quotas is not achievable before presidential election is done.
Why not just focus on getting name check delay solved. It is under congress scrutiny already, all need are to add more oil to the fire.
IV is trying to achieve these things...but it cannot do until unless members contribute something...IV need contributions to invest in the omnibus bill Lobbying efforts.. for more details look at below thread...
http://immigrationvoice.org/forum/showthread.php?t=15905
Get one thing done is better than spreading limited resources on multiple topics. To increase immigration quotas is not achievable before presidential election is done.
Why not just focus on getting name check delay solved. It is under congress scrutiny already, all need are to add more oil to the fire.
more...
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
2010 2nd Topic - The Java Hut
murali77
08-05 12:34 PM
poorslumdog
Please email me at win77in@gmail.com for the CSCP material.
thanks
Murali
Please email me at win77in@gmail.com for the CSCP material.
thanks
Murali
more...
CT_Green
07-10 10:16 AM
If everyone agrees we should have a media camapign where we contact all the media outlets and let them know how CNN is providing air time to Lou Dobbs for his own propoganda against legal immigrants.
CNN should be ashamed of themselves for not providing fair reporting based on facts.
CNN should be ashamed of themselves for not providing fair reporting based on facts.
hair Java Hut Series: Portuguese
bigboy007
08-15 08:59 AM
Yes might be but Labor cert is not being part of list of docx that need to be attached even if ur 140 is pending as if you would have included I-140 receipt notice but in your case it seems better u do it rather feel sorry . But refiling in many normal cases wont help much unless if there is an issue in it.
I would not re-submit only for EVL, but it is important you review your entire AOS application set that went out to USCIS.
I reviewed the photocopies of our AOS applications and found a few omissions e.g. not including
1. EVL
2. pending I-140 receipt notice
3. Labor cert approval which would clearly show the priority date-- instead they put a wrong priority date in the covering letter.
I decided it is a higher risk to rely on such a messed up application!
Hence, I am working to re-submit our AOS. I asked that I review the entire application in advance this time around:) Thanks IV... I have come a long way because of YOU!
BTW a small issue I found on my family's AOS applications:
For my dependants... in Part (2) Application Type, I think we should check (b) my spouse or parent applied for....
it is currently (a) an immigrant petition giving me....
It was also (a) in their first set of AOS applications
Am I right in saying the checkbox to be selected is (b) not (a)?
Thanks!
I would not re-submit only for EVL, but it is important you review your entire AOS application set that went out to USCIS.
I reviewed the photocopies of our AOS applications and found a few omissions e.g. not including
1. EVL
2. pending I-140 receipt notice
3. Labor cert approval which would clearly show the priority date-- instead they put a wrong priority date in the covering letter.
I decided it is a higher risk to rely on such a messed up application!
Hence, I am working to re-submit our AOS. I asked that I review the entire application in advance this time around:) Thanks IV... I have come a long way because of YOU!
BTW a small issue I found on my family's AOS applications:
For my dependants... in Part (2) Application Type, I think we should check (b) my spouse or parent applied for....
it is currently (a) an immigrant petition giving me....
It was also (a) in their first set of AOS applications
Am I right in saying the checkbox to be selected is (b) not (a)?
Thanks!
more...
utthesta
11-26 01:15 PM
Filed on July 27, we have not yet received FP Notice.
Talked to service center (3rd party customer service) on Nov 16, they have assigned a ticket, they mentioned USCIS will respond with in 45 days.
Talked to service center (3rd party customer service) on Nov 16, they have assigned a ticket, they mentioned USCIS will respond with in 45 days.
hot java the hut, has a winged tee
boreal
08-12 10:59 AM
You can revnew your GC after an intial period of 10 years. You are at your free will and wish to remain on your GC. You will be eligible for Naturalization after 5 years. That does not mean that you have to use that oppurtunity.
yep, makes sense.
Regarding the orignal topic, even I have never heard anyone not getting citizenship because of them leaving the GC employer. Personally, I won't wait for six months or even a single day, if I see a better opportunity.
yep, makes sense.
Regarding the orignal topic, even I have never heard anyone not getting citizenship because of them leaving the GC employer. Personally, I won't wait for six months or even a single day, if I see a better opportunity.
more...
house Beverly Boulevard java hut
USDream2Dust
04-08 02:38 PM
www.uscis.gov
Everything filled up including masters degree H1 quota. All in all a big lotto.
Everything filled up including masters degree H1 quota. All in all a big lotto.
tattoo Be at the Java Hut in Fairfax
alterego
12-12 04:58 PM
Here's your answer in the bulletin
EMPLOYMENT: Demand for numbers in the Employment Third �Other Workers� category, as well as the China and India Employment Second preference categories, has been escalating. No movement in those cut-off dates will be possible until the current level of demand subsides.
Translated that means, the Tsunami of 245i and Backlog labours is hitting, there can be no movement until this improves.
In other words, absent legislative action to allow more visas, you are lucky if dates do not retrogress.
We should stop following bulletins and focus more on lobbying.
EMPLOYMENT: Demand for numbers in the Employment Third �Other Workers� category, as well as the China and India Employment Second preference categories, has been escalating. No movement in those cut-off dates will be possible until the current level of demand subsides.
Translated that means, the Tsunami of 245i and Backlog labours is hitting, there can be no movement until this improves.
In other words, absent legislative action to allow more visas, you are lucky if dates do not retrogress.
We should stop following bulletins and focus more on lobbying.
more...
pictures Bob#39;s Java Hut - Double
clove
07-04 04:20 PM
wasted on medical exam : 760$;
wasted on mental tension and frustration : priceless
wasted on mental tension and frustration : priceless
dresses ye olde java hut know that
number30
10-26 11:28 PM
Hi i just checked my 140 online status is shows,
"On August 30, 2007, we shipped this approved or re-affirmed case to the Department of State for visa processing. For more information, please contact them directly."
But why are they sending it to DOS unless you file for Consular processing?
"On August 30, 2007, we shipped this approved or re-affirmed case to the Department of State for visa processing. For more information, please contact them directly."
But why are they sending it to DOS unless you file for Consular processing?
more...
makeup Java Hut -- delicious!
rockstart
04-21 03:13 PM
Trust me there is no way you can sell a diploma as equivalent to degree program. I mean all people can do is if they have 3 Yr BSc + 2 Yr MSc they can hope that CIS accepts it as equal to 4 Yr BS degree. I have seen cases of AMIE candidates rejected stating that US does not recognize AMIE. Now in these two cases atleast their home countries recognize their degrees, In your case India govt will also classify you as diploma holder and not degree holder. Also how can you add 1st year BCom with Hotel Management diploma I mean they are 2 completely different streams?
Here is a solution that I would have done if I was in your shoes. If you have enough time on your H1 then please enroll into a community college or University and try to get a US bachelor degree. I am sure your diploma will help you to get waiver for some courses so that will save time. Also taking evening classes will let you keep your current job. I know it is tough but that is pretty much the best alternative you have. USCIS has clearly stated that your diploma is not equivalent to US degree. I mean even the best evaluation agency can do is compare India degree program to US degree program how can you compare diploma to degree
HI
The minimum educational requirement for the diploma was 10+2. However I did 1st year of BCom out of choice before enrolling in the 3 year diploma. The diploma was for hotel management from a Govt Funded/recognized institute with nationwide entrance tests. DOnt know their acceptance rates but it falls under the umbrella of the Ministry of Tourism.
I think in the denial letter the officer is accepting that I have an equivalent of a bachelors degree but is still denying it. My attorney thinks that he might be mistaken & might have processed the case as EB2 instead of EB3.
Here is a solution that I would have done if I was in your shoes. If you have enough time on your H1 then please enroll into a community college or University and try to get a US bachelor degree. I am sure your diploma will help you to get waiver for some courses so that will save time. Also taking evening classes will let you keep your current job. I know it is tough but that is pretty much the best alternative you have. USCIS has clearly stated that your diploma is not equivalent to US degree. I mean even the best evaluation agency can do is compare India degree program to US degree program how can you compare diploma to degree
HI
The minimum educational requirement for the diploma was 10+2. However I did 1st year of BCom out of choice before enrolling in the 3 year diploma. The diploma was for hotel management from a Govt Funded/recognized institute with nationwide entrance tests. DOnt know their acceptance rates but it falls under the umbrella of the Ministry of Tourism.
I think in the denial letter the officer is accepting that I have an equivalent of a bachelors degree but is still denying it. My attorney thinks that he might be mistaken & might have processed the case as EB2 instead of EB3.
girlfriend logo at this java hut.
crystal
08-21 10:05 AM
I think That is correct. If they use ur money to labor filing preparation they cannot sell it others for sure. But be sure to have enough proof for about what you going to complain.
May be it's true that labor and 140 belongs to the company, but they just can't take money from employees and sell it to someone.
May be it's true that labor and 140 belongs to the company, but they just can't take money from employees and sell it to someone.
hairstyles Bob#39;s Java Hut by Kate Pabst
EkAurAaya
10-11 04:23 PM
Thats true..everybody are bothered about EAD and FP. I am here for more than 8 years in this country. IV should emphasise this and USICS should allow affected candidates like us to file I-485 and atleast get EAD. we have priority date earlier compared to others.
What is your PD? were you stuck in BEC?
What is your PD? were you stuck in BEC?
gc_bucs
04-01 06:09 PM
sent fax # 11
sanju
10-23 04:18 PM
With a comment "ooooo". I want the IV admin's to find out who that coward is and ban them from any and every board that is out there on internet. If they don't do it, I will be so scared of posting any of my thoughts in future as that person will come and give me more red , depriving IV of a valuable member.
Just kidding. As you guessed, things are a little slow at work today.
This a good one. I almost felt irritated reading first few lines. But it turned out good. :p This is good. No more complaints about red dot messages.
Just kidding. As you guessed, things are a little slow at work today.
This a good one. I almost felt irritated reading first few lines. But it turned out good. :p This is good. No more complaints about red dot messages.
No comments:
Post a Comment